| Typical Values of Organic Matting Agents |
| Product |
oil absorption |
bulk density |
pH-value |
d50 |
d90 |
notes |
 |
325 |
150 |
8,6 |
6,3 |
13,8 |
Heat-resistant up to 200 °C, light fast and weather-resisting. |
 |
278 |
150 |
8,7 |
4,6 |
10,6 |
Low particle size. Use primarily in thin film-systems. |
 |
251 |
120 |
7,5 |
3,4 |
6,7 |
Low particle size. Use primarily in thin film-systems. |
 |
238 |
100 |
7,6 |
7,4 |
17,1 |
For UV-curing systems. |
 |
183 |
150 |
7,4 |
6,3 |
14,5 |
For UV-curing systems. |
 |
230 |
100 |
7,5 |
6,7 |
13,9 |
2-component PU-systems |
 |
182 |
145 |
8,5 |
6,0 |
12,8 |
coil coating systems |
 |
206 |
120 |
7,8 |
6,0 |
13,3 |
do it yourself systems |
 |
288 |
150 |
9,0 |
6,3 |
17,3 |
PTFE modified, excellent heat resistance. |
 |
167 |
220 |
10,0 |
5,5 |
12,1 |
Very low influence on viscosity. |
 |
333 |
140 |
8,7 |
7,0 |
16,0 |
Heat-resistant up to 200 °C, light fast and weather-resisting. |
 |
325 |
150 |
8,6 |
6,4 |
14,2 |
Heat-resistant up to 200 °C, light fast and weather-resisting. |
 Download table (pdf)
All values are based on average analysis and are therefore only approximate values.
These values are not always a component of the respective specifications.
Notes:
|
Oil absorption value:
|
Method APM - 30 (house method), Palatinol N, dimension: g/100g |
|
Bulk density:
|
Method APM - 13 (house method), dimension: kg/m3 |
| pH - Value: |
Method APM - 10 (house method) |
|
Particle size analysis:
|
Methods MWM 29; APM - 31 (house method), dimension: µm
|
|
Melting point:
|
Methode APM - 12 (housemethod), Dimension: °C
|
 |
Brochure "Softfeel Coatings" |
 Brochure "Softfeel Coatings" : download (0,6 Mb pdf)
If you want this brochure in paper form please click on button "order sample".
|
 |
Brochure "Matting Agents" |
Brochure "Matting Agents" : download (5,7 Mb pdf)
If you want this brochure in paper form please click on button "order sample".
|
 |
DEUTERON MK |
micronized matting plastic, temperature stability above 200 °C, non soluble in organic solvents, excellent lightfastness and weather resis-tance in solvent-based and water-based systems.
|
 |
DEUTERON MK-F |
micronized matting plastic, temperature stability above 200 °C, non soluble in organic solvents, excellent lightfastness and weather resis-tance in solvent-based and water-based systems.Similar to DEUTERON MK but smaller particles in the upper range of particles size. Primary designed for use in thin-layer coatings.
|
 |
DEUTERON MK-F6 |
micronized matting plastic, temperature stability above 200 °C, non soluble in organic solvents, excellent lightfastness and weather resistance. Easy handling. Similar to DEUTERON MK-F but smaller particle size. Primary disigned for use in extrem thin layer coatings.
|
 |
DEUTERON PMH C |
Micronized matting plastic with compact particle structure. Resistant to temperature above 200 °C. Slight influence in viscosity. Improves the mechanical resistance of coatings which are flat by the use of silica-products.
|
 |
PERGOPAK M3 |
polymeric matting plastic and effect agent for paints and lacquers. Temperature stability above 200 °C, non soluble in organic solvents, exellent lightfastness and weather resistance in solvent-based and water-based systems.
|
 |
PERGOPAK M4 |
polymeric matting plastic and effect agent for paints and lacquers. Temperature stability above 200 °C, non soluble in organic solvents, exellent lightfastness and weather resistance in solvent-based and water-based systems.
|
| |
PERGOPAK M5 |
| see DEUTERON MK-F
|
| |
PIAFINE MC |
|
see DEUTERON PMH C
|
 |
DEUTERON MM 659 |
matting agent for uv-curing systems.
|
 |
DEUTERON MM 669 |
matting agent for uv-curing systems, if the increasing of viscosity should be so low as possible.
|
 |
DEUTERON MM 680 |
matting agents for 2 component solvent containing top coats, contains organic and inorganic components. Good matting effect, low binder demand. Wax free.
|
 |
DEUTERON MM 682 |
matting agent for coil coatings, preferable pigmented as well as for conventional stoving enamels. Good mechanical properties because combination of organic and inorganic components. Wax free.
|
 |
DEUTERON MM 684 |
matting agent for watery and solvent containing DIY paints. Compound from organic and inorganic components free of waxes. Leads to good processing properties at a manual application.
|
 |
DEUTERON MM 823 |
PTFE modified micronized plastic. Slip and antimar agent with excellent temperature stability and small particle size.
|
|
| Show 1 to 16 (of in total 16 products) |
Sites: 1 |
|
|
